Sometimes printers are trouble-makers. They generate troubles not only when they are printing, but also when new toner cartridges are put into them. After you put a new toner cartridge into your printer, the printer does not work well and shows the following messages “toner low”or “toner empty”.etc. You’re maybe thinking that it’s because of the new toner cartridge that you’re getting these sort of messages. But I assure you that it is not your toner’s fault! Actually, what you need to do in order to remove these kinds of messages is to manually reset your printer. In the following section I will show you how to reset the TN450 toner for the Brother HL series printers.
1.Make sure the printer is turned off.
2.Open the printer’s front cover.
3.Hold the Go button while turning the printer on.
4.When the Toner, Drum, and Error LEDs are on and the Ready LED is off, release the GO button. All of the LEDs will turn off.
5.Press the Go button two (2) times. The Toner, Drum, and Error LEDs will turn on.
6.Depending on your cartridge:
TN420 cartridge – Press the Go button six (6) times.
TN450 cartridge – Press the Go button seven (7) times.
The Error LED should now be flashing, close the front cover.
Besides, after changing a DR420 drum unit in a Brother HL-2220, the printer’s page count needs to be reset. This will turn off the drum warning light on the printer. What you need to do is to Simply open the front cover, and hold the “GO” button until all four LED’s are lit. Release the “GO” button and close the front cover.
With the help of this blog, you no longer need to worry about the problems that come after the changing toners. If you are interested in the mentioned products, you are welcomed to our website 123inkcartridges.ca. Our website offers free shipping for all the orders above $49. You will certainly enjoy the shopping experience on our website!