Premium 3D Printer Filament ABS 1.75MM 1kg/spool Red

Premium 3D Printer Filament ABS 1.75MM 1kg spool, Red

Have you heared about “3D Printer Filament ABS“,in case you don’t know,I will explain it simply. ABS is one of the most commonly used filament types for 3D printing,which takes the full advantage of  high tensile strength and good overall toughness.this greatly reduced weight and cost for printing large models.It also takes much better low density and softer than PLA.Since ABS make of hardness material,it will not appear white dot when being bend.

The thickness of this 1 Kg spool Premium 3D Printer Filament is 1.75mm ±0.10mm,but with a roundness variation of only 0.05mm.and the nominal processing temperature of it reach 230° C (446°F).Furthermore,in order to ensure accuracy  the entire length of the filament,thickness and roundness factors are strict test at the factory too.After a long time use,you will find some black filament is fragile that’s because it mixed with scrap outlet, rework & recycle material,as well as dispose,for quality assurance purpose.

The key defects of using ABS is that it  emit a white smoke with concentrated smell.Therefore,you had better make sure the printing room is well ventilated before using ABS.Besides,it has a high moisture absorption rate and a high temperature printing could cause bubbles or pocks in the extrusion.That’s why advise not to open a spool unless you are ready to print and to store any unused portion.

There are 3 colors of ABS available in 123InkCartridges.ca,including orange,white,and black.Compatible Printers /  Afinia 3D Printer H479  

colors of ABS

Reel Dimensions:

Reel Diameter: 195mm (7.68″)
Hub Diameter: 95mm (3.74″)
Spindle Diameter: 38mm (1.50″)
Reel Width: 80mm (3.15″)

 

About

Andrew Lu - Marketing Manager - Shopper+ Networks Canada

Posted in Accessories, Cables Tagged with: , ,

Leave a Reply

Your email address will not be published. Required fields are marked *

*