Today 123inkcartridges.ca will introduce more detail of drum unit and how to clean the drum until when you get print quality problem..
Konica-Minolta 1710591-001 OEM Drum Unit
What is drum unit???
The laser drum unit is a printer supply, that is responsible for transferring the laser toners onto the paper. It basically attracts the toner through static electricity, so some parts of the drum should be oppositely charged from the toner to allow contact. This is when the letters are formed and pressed on the paper to form the print.
The drum unit is an aluminum cylinder coated with photosensitive material that clips onto the back of the toner. Drum unit is a consumable part need to replace after every 4-5 toners, when your prints appear excessively blackened, or you get a check drum warning.
Brother DR 110CL New Compatible Drum Unit
How to clean the drum unit??
1.Turn off the printer power switch. Press the front cover release button and then open the front cover.
2.Hold the green handle of the drum unit. Lift the drum unit up and then pull it out until it stops.
3.Release the gray lock lever (1) that is on the left side of the printer. Pull the drum unit completely out of the printer using the green handles on the drum unit.
4.Hold the handle of the toner cartridge and pull it out of the drum unit. Repeat this for all the toner cartridges.
5.Turn the drum unit over by holding the handle. Make sure that the four drum unit gears are on the left side and the drum unit gear “1″ is located furthest away from you. The numbers can be found on the drum unit gear.
6.See the print sample to identify the color causing the problem. The color of the spots is the color of the drum you should clean. For example, if the spots are cyan, you should clean the drum for cyan. Put the print sample in front of the drum, and find the exact position of the poor print.
7.Turn the drum unit gear toward you by hand while looking at the surface of the drum (1).
8.When you have found the mark on the drum that matches the print sample, hold the middle of a cotton swab and wipe the surface of the drum gently until the dust or paper powder on the surface comes off.
9.Turn the drum unit gear toward you by hand to return it to the home position. The home position of each drum can be identified by matching the number on the drum unit gear to the same number on the left side of the drum unit.
10.Make sure that the number on each of the four drum unit gears matches the corresponding number on the side of the drum unit.
11.Using the green handles turn the drum unit back over
12.Hold the handle of the toner cartridge and slide the toner cartridge into the drum unit. Make sure that you match the toner cartridge color to the same color label on the drum unit, and make sure that you fold down the toner cartridge handle (1) once the toner cartridge is in place. Repeat this for all the toner cartridges.
13.Put the drum unit back in the printer as follows.
14.Close the front cover.
