Buy Lexmark 100XL New Compatible Ink Cartridge Combo set High Yield for only $42.99 @ www.123inkcartridges.ca
Do you have trouble with installing Lexmark 100XL ink cartridges such as having error message?
It it annoying that printer does not recognize Lexmark 100XL ink cartridges and Lexmark 100XL does not work on your printer?
Before you install Lexmark 100XL ink cartridge, there are some instructions you should know.
Note Before:
If the cartridge can not be recognized, please refer to method one or method two of instructions below
1. Tear off the yellow tape
2. Remove the protection clip
3. Install in the printer
4. Click the cartridge into place and close lid
Method one:
1. Remove the cartridge and install the used or new OEM cartridge. Then close the printer cover
2. When the printer stops after detecting, take out the OEM cartridge.
3. Reinstall in the printer & repeat steps if required.
Method two:
1. If the cartridge is not recognized
2. Remove the cartridge
3. Gently cut off the black carbon article allowed to disconnect
4. Reinstall in the printer & repeat steps if required
Attention
1. Do not press hard on either side of the cartridge when removing the yellow tape.
2. Do not turn the cartridge upside down once the yellow tap and clip have been removed.
3. A gentle scratch should be enough to remove the excess carbon.
4. Please perform nozzle test, if nay break lines or stripes appears, please clean the nozzle.
Hope above information will help you.
The Lexmark 100XL ink cartridges are compatible with
Lexmark Impact S301/Lexmark Impact S305/Lexmark Interact S605/Lexmark Interpret S405
Lexmark Intuition S505/Lexmark Pinnacle Pro901/Lexmark Platinum Pro905
Lexmark Prestige Pro805/Lexmark Prevail Pro705/Lexmark Prospect Pro205
Lexmark Prospect Pro205 Plus/Lexmark S815 Genesis/Lexmark S816 Genesis
You can order Lexmark 100XL New Compatible Ink Cartridge Combo set High Yield by visiting www.l23inkcartridges.ca good services and fast delivery
Hello, my Lexmark pro805 printer cannot “authorize” the cartridge. I tried to follow solution no.2, but have no idea what “Gently cut off the black carbon article allowed to disconnect” is supposed to mean.
Any ideas?
Thanks
Please call our customer service 1-8669797463 or send us inquiry or chat with our customer representative by livechat.
Thank you very much for your support!
What if the printer sill does not recognize the color cartridges ? (I’ve cut off the carbon article and reinstalled the cartridges). Now the display says “Install color cartridges” and the printer would not print.
Hi,
We would recommend you to contact to our customer service department, the troubleshooting that they provided will be definitely helpful to you.
I have a prevail pro705 that I tried to replace the black ink cartridge.
the printer would not authorize it. I then scratched the article and reinstalled the cartridge. 
I then tried another cartridge thinking that I cut the article incorrectly but with the same results. 
I needed the printer right-a-way so I took another step. Taking the empty OEM cartridge, I removed it’s transponder and replaced the one in the new 123 cartridge. It worked but the level is incorrect but it printed. 
What am I doing wrong with the cartridge that I could not get it to be recognized
Hi Dekek,
We highly encourage you contact our customer service, what they are trying to do they will follow you every step to make sure you are making it right, and also from the troubleshooting that they are offering will definitely help you to prevent machine damage by install things incorrectly, since for some model the printer cartridges might be tricky, but there is always solution out there.